Fix extra newlines before tool calls in JSON filter

The JSON tool call filter was outputting newlines immediately as they
were encountered. When the LLM output contained multiple newlines before
a tool call, each newline was output before the tool call JSON was
detected and suppressed, leaving orphaned blank lines in the output.

Changes:
- Add pending_newlines field to FilterState to buffer newlines at line start
- First newline after content is output immediately, subsequent ones buffered
- When tool call confirmed, pending_newlines cleared (suppressing extra blanks)
- When not a tool call, pending_newlines output with the buffer
- Add flush_json_tool_filter() to flush pending content at end of streaming
- Update tests to reflect new behavior
- Add tests for newline suppression behavior

agents/breaker.md

@@ -0,0 +1,79 @@
+You are **Breaker**.
+
+Your role is to **find real failures**: bugs, brittleness, edge cases, and unsafe assumptions.
+You are adversarial and methodical. You try to make the system fail fast, then explain why.
+
+You are **whitebox-aware** (you may read internals to choose targets), your findings must be grounded in **observable behavior** and **minimal repros**.
+
+---
+
+## Prime Directive
+**DO NOT CHANGE PRODUCTION CODE.**
+
+- You must not modify application/runtime code, architecture, assets, or documentation.
+- You may add **minimal isolated repro fixtures** (e.g., tiny inputs) only if necessary to make a failure deterministic.
+
+---
+
+## What You Produce
+Your output is a **bounded breakage/QA report** with high-signal items only.
+
+For each issue you report, include:
+
+### 1) Title
+Short, specific failure statement.
+
+### 2) Repro
+- exact command / steps
+- minimal input(s) or state needed
+- expected vs actual
+
+### 3) Diagnosis
+- suspected root cause with file:line pointers
+- triggering conditions
+- deterministic vs flaky
+
+### 4) Impact
+- severity (crash / data loss / incorrect behavior / annoying)
+- likelihood (rare / common)
+
+### 5) Next probe (optional)
+If not fully proven, state the single most informative next experiment.
+
+IMPORTANT: Write your report to: `analysis/breaker/YYYY-MM-DD.md` (today's date)
+
+---
+
+## Exploration Rules
+- Start broad, then shrink: find a failure, then minimize it.
+- Prefer **minimal repros** over exhaustive enumeration.
+- Prefer **integration-style failures** (end-to-end behavior) over unit-internal assertions.
+- In addition to repo exploration, use git diffs to guide exploration.
+- If you cannot reproduce, say so plainly and list what’s missing.
+
+---
+
+## Explicit Bans (Noise Control)
+You must not:
+- generate large test suites
+- chase coverage
+- list speculative “what if” edge cases without evidence
+- propose refactors or redesigns
+
+No hype. No “next steps” backlog.
+
+---
+
+## Output Size Discipline
+- Report **0–5 issues max**.
+- If you find more, keep only the most severe or most likely.
+- If nothing meaningful is found, write: `No actionable failures found.`
+
+---
+
+## Success Criteria
+You succeed when:
+- failures are real and reproducible
+- repros are minimal and deterministic when possible
+- diagnoses are crisp and grounded
+- output is concise and high-signal

crates/g3-cli/src/filter_json.rs

@@ -53,6 +53,8 @@ struct FilterState {
     at_line_start: bool,
     /// Whitespace seen after newline (before potential {)
     pending_whitespace: String,
+    /// Newlines accumulated at line start (before potential tool call)
+    pending_newlines: String,
 }
 
 impl FilterState {
@@ -65,6 +67,7 @@ impl FilterState {
             escape_next: false,
             at_line_start: true, // Start of input counts as line start
             pending_whitespace: String::new(),
+            pending_newlines: String::new(),
         }
     }
 
@@ -76,6 +79,7 @@ impl FilterState {
         self.escape_next = false;
         self.at_line_start = true;
         self.pending_whitespace.clear();
+        self.pending_newlines.clear();
     }
 }
 
@@ -192,11 +196,16 @@ pub fn filter_json_tool_calls(content: &str) -> String {
 fn handle_streaming_char(state: &mut FilterState, ch: char, output: &mut String) {
     match ch {
         '\n' => {
-            // Output the newline and any pending whitespace
-            output.push_str(&state.pending_whitespace);
-            output.push(ch);
-            state.pending_whitespace.clear();
-            state.at_line_start = true;
+            // Buffer extra newlines at line start - they may precede a tool call
+            // Always output the first newline, but buffer subsequent ones
+            if state.at_line_start {
+                state.pending_newlines.push(ch);
+            } else {
+                // First newline after content - output it and enter line start mode
+                output.push(ch);
+                state.at_line_start = true;
+                state.pending_newlines.clear(); // Reset - this newline was output
+            }
         }
         ' ' | '\t' if state.at_line_start => {
             // Accumulate whitespace at line start
@@ -208,10 +217,12 @@ fn handle_streaming_char(state: &mut FilterState, ch: char, output: &mut String)
             state.state = State::Buffering;
             state.buffer.clear();
             state.buffer.push(ch);
-            // Don't output pending_whitespace yet - we might need to suppress it
+            // Don't output pending_newlines or pending_whitespace yet - we might need to suppress them
         }
         _ => {
-            // Regular character - output any pending whitespace first
+            // Regular character - output any pending newlines and whitespace first
+            output.push_str(&state.pending_newlines);
+            state.pending_newlines.clear();
             output.push_str(&state.pending_whitespace);
             state.pending_whitespace.clear();
             output.push(ch);
@@ -233,15 +244,18 @@ fn handle_buffering_char(state: &mut FilterState, ch: char, output: &mut String)
             state.brace_depth = 1; // We already have the opening {
             state.in_string = true; // We're inside the "tool" value string
             state.escape_next = false;
-            // Discard pending_whitespace (it's part of the tool call line)
+            // Discard pending_newlines and pending_whitespace (they're part of the tool call)
+            state.pending_newlines.clear();
             state.pending_whitespace.clear();
             state.buffer.clear();
         }
         Some(false) => {
             // Not a tool call - release buffered content
             debug!("Not a tool call - releasing buffer");
+            output.push_str(&state.pending_newlines);
             output.push_str(&state.pending_whitespace);
             output.push_str(&state.buffer);
+            state.pending_newlines.clear();
             state.pending_whitespace.clear();
             state.buffer.clear();
             state.state = State::Streaming;
@@ -252,8 +266,10 @@ fn handle_buffering_char(state: &mut FilterState, ch: char, output: &mut String)
             if state.buffer.len() > MAX_BUFFER_FOR_DETECTION {
                 // Too long without confirmation - not a tool call
                 debug!("Buffer exceeded max length - not a tool call");
+                output.push_str(&state.pending_newlines);
                 output.push_str(&state.pending_whitespace);
                 output.push_str(&state.buffer);
+                state.pending_newlines.clear();
                 state.pending_whitespace.clear();
                 state.buffer.clear();
                 state.state = State::Streaming;
@@ -347,6 +363,24 @@ pub fn reset_json_tool_state() {
     });
 }
 
+/// Flushes any pending content from the JSON filter.
+///
+/// Call this at the end of streaming to ensure any buffered newlines
+/// or whitespace that wasn't followed by a tool call gets output.
+pub fn flush_json_tool_filter() -> String {
+    JSON_TOOL_STATE.with(|state| {
+        let mut state = state.borrow_mut();
+        let mut output = String::new();
+        // Output any pending newlines and whitespace
+        output.push_str(&state.pending_newlines);
+        output.push_str(&state.pending_whitespace);
+        output.push_str(&state.buffer);
+        state.pending_newlines.clear();
+        state.pending_whitespace.clear();
+        state.buffer.clear();
+        output
+    })
+}
 
 #[cfg(test)]
 mod tests {
@@ -438,4 +472,28 @@ mod tests {
         // The tool call should be filtered out
         assert_eq!(result, "Text\n\nMore");
     }
+
+    #[test]
+    fn test_multiple_newlines_before_tool_call_suppressed() {
+        // This test verifies that extra blank lines before a tool call are suppressed.
+        // This fixes the visual issue where many blank lines appeared before tool calls.
+        reset_json_tool_state();
+        
+        // Input has 4 newlines before the tool call (3 blank lines)
+        let input = "Before\n\n\n\n{\"tool\": \"shell\", \"args\": {}}\nAfter";
+        let result = filter_json_tool_calls(input);
+        
+        // Only one newline should remain before where the tool call was
+        // (the first newline after "Before" is preserved, extra ones are suppressed)
+        assert_eq!(result, "Before\n\nAfter");
+    }
+
+    #[test]
+    fn test_single_newline_before_tool_call_preserved() {
+        // A single newline before a tool call should be preserved
+        reset_json_tool_state();
+        let input = "Before\n{\"tool\": \"shell\", \"args\": {}}\nAfter";
+        let result = filter_json_tool_calls(input);
+        assert_eq!(result, "Before\n\nAfter");
+    }
 }

crates/g3-cli/tests/filter_json_stress_test.rs

@@ -3,7 +3,7 @@
 //! These tests hammer the filter with malformed JSON, partial tool calls,
 //! edge cases, and adversarial inputs to ensure robustness.
 
-use g3_cli::filter_json::{filter_json_tool_calls, reset_json_tool_state};
+use g3_cli::filter_json::{filter_json_tool_calls, flush_json_tool_filter, reset_json_tool_state};
 
 // ============================================================================
 // Malformed JSON Tests
@@ -478,7 +478,9 @@ fn test_empty_input() {
 #[test]
 fn test_just_newline() {
     reset_json_tool_state();
-    assert_eq!(filter_json_tool_calls("\n"), "\n");
+    let result = filter_json_tool_calls("\n");
+    let flushed = flush_json_tool_filter();
+    assert_eq!(format!("{}{}", result, flushed), "\n");
 }
 
 #[test]

crates/g3-cli/tests/filter_json_test.rs

@@ -211,7 +211,8 @@ After"#;
 {"tool": "final_output", "args": {"summary": "Task completed successfully"}}"#;
 
         let result = filter_json_tool_calls(input);
-        let expected = "\n";
+        // Leading newline before tool call at start of input is suppressed
+        let expected = "";
         assert_eq!(result, expected);
     }
 
@@ -509,13 +510,13 @@ End"#;
 
         let result = filter_json_tool_calls(input);
         
-        // The tool call starts on its own line after the read_file output,
-        // so it should be filtered out. Only the read_file output should remain.
+        // The tool call starts on its own line after the read_file output.
+        // The tool call is filtered out, and extra newlines before it are suppressed.
+        // Only one newline remains (the line ending after "1ms").
         let expected = r#"┌─ read_file | ./crates/g3-cli/src/ui_writer_impl.rs [13000..13300]
 │     }
 │ (11 lines)
 └─ ⚡️ 1ms
-
 "#;
         assert_eq!(
             result, expected,
@@ -538,9 +539,10 @@ End"#;
         let result = filter_json_tool_calls(input);
         
         // The shell tool call starts at line beginning, so it should be filtered out
-        // Only the surrounding text should remain
-        // Note: The tool call is on its own line, so filtering leaves an empty line
-        let expected = "Let me create a test case:\n\n\n\nDone.";
+        // Only the surrounding text should remain.
+        // Extra newlines before the tool call are suppressed (one blank line before
+        // becomes just the line ending), but newlines after are preserved.
+        let expected = "Let me create a test case:\n\n\nDone.";
         
         assert_eq!(
             result, expected,