From 052e5967e1e62fb6c3ccda460e2970039a243f35 Mon Sep 17 00:00:00 2001 From: Alexander Miroshnichenko Date: Sun, 13 Dec 2020 16:31:02 +0300 Subject: [PATCH] sys-fs/lvm2: Add version 2.02.177 with musl support and Red Hat patches Red Hat patches from lvm2-2.02.177-5.fc28: https://koji.fedoraproject.org/koji/buildinfo?buildID=1096618 --- sys-fs/lvm2/Manifest | 29 ++ sys-fs/lvm2/files/clvmd.confd-2.02.39 | 9 + sys-fs/lvm2/files/clvmd.rc-2.02.39 | 145 +++++++++ .../lvm2/files/device-mapper.conf-1.02.22-r3 | 1 + .../lvm2/files/device-mapper.rc-2.02.105-r2 | 146 +++++++++ sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1 | 25 ++ sys-fs/lvm2/files/dmtab | 11 + .../files/lvm-monitoring.initd-2.02.105-r2 | 38 +++ sys-fs/lvm2/files/lvm.confd-2.02.28-r2 | 5 + sys-fs/lvm2/files/lvm.rc-2.02.172 | 145 +++++++++ .../files/lvm2-2.02.129-example.conf.in.patch | 52 +++ .../lvm2-2.02.166-HPPA-no-O_DIRECT.patch | 12 + .../lvm2-2.02.176-pthread-pkgconfig.patch | 29 ++ .../files/lvm2-2.02.183-fix-stdio-usage.patch | 29 ++ ...mplement-libc-specific-reopen_stream.patch | 24 ++ .../files/lvm2-2.02.183-portability.patch | 21 ++ .../lvm2-2.02.56-lvm2create_initrd.patch | 72 +++++ ...vm2-2.02.63-always-make-static-libdm.patch | 42 +++ .../files/lvm2-2.02.67-createinitrd.patch | 18 ++ .../lvm2/files/lvm2-2.02.99-locale-muck.patch | 11 + ...-2_02_178-lvmlockd-fix-uninitialized.patch | 13 + ...2-2_02_180-filter-use-valid-pointers.patch | 25 ++ sys-fs/lvm2/files/lvm2-lvmetad-timeout.patch | 16 + .../lvm2-set-default-preferred_names.patch | 30 ++ sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2 | 12 + sys-fs/lvm2/files/lvmetad.initd-2.02.116-r3 | 17 + sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1 | 17 + sys-fs/lvm2/lvm2-2.02.177.ebuild | 303 ++++++++++++++++++ sys-fs/lvm2/metadata.xml | 32 ++ 29 files changed, 1329 insertions(+) create mode 100644 sys-fs/lvm2/Manifest create mode 100644 sys-fs/lvm2/files/clvmd.confd-2.02.39 create mode 100644 sys-fs/lvm2/files/clvmd.rc-2.02.39 create mode 100644 sys-fs/lvm2/files/device-mapper.conf-1.02.22-r3 create mode 100644 sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2 create mode 100644 sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1 create mode 100644 sys-fs/lvm2/files/dmtab create mode 100644 sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2 create mode 100644 sys-fs/lvm2/files/lvm.confd-2.02.28-r2 create mode 100644 sys-fs/lvm2/files/lvm.rc-2.02.172 create mode 100644 sys-fs/lvm2/files/lvm2-2.02.129-example.conf.in.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.166-HPPA-no-O_DIRECT.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.176-pthread-pkgconfig.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.183-fix-stdio-usage.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.183-implement-libc-specific-reopen_stream.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.183-portability.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.56-lvm2create_initrd.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.63-always-make-static-libdm.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.67-createinitrd.patch create mode 100644 sys-fs/lvm2/files/lvm2-2.02.99-locale-muck.patch create mode 100644 sys-fs/lvm2/files/lvm2-2_02_178-lvmlockd-fix-uninitialized.patch create mode 100644 sys-fs/lvm2/files/lvm2-2_02_180-filter-use-valid-pointers.patch create mode 100644 sys-fs/lvm2/files/lvm2-lvmetad-timeout.patch create mode 100644 sys-fs/lvm2/files/lvm2-set-default-preferred_names.patch create mode 100644 sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2 create mode 100644 sys-fs/lvm2/files/lvmetad.initd-2.02.116-r3 create mode 100644 sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1 create mode 100644 sys-fs/lvm2/lvm2-2.02.177.ebuild create mode 100644 sys-fs/lvm2/metadata.xml diff --git a/sys-fs/lvm2/Manifest b/sys-fs/lvm2/Manifest new file mode 100644 index 0000000..49e4601 --- /dev/null +++ b/sys-fs/lvm2/Manifest @@ -0,0 +1,29 @@ +AUX clvmd.confd-2.02.39 213 BLAKE2B bfca5c33cbff432427291c162f8e1c5172957c4d1dbabae8605bf1aab7aaf0c8d9b1b67f81219b3a3ae0822e0a9e17c8bde2b59c27a0fafd8495b67e0c7708c5 SHA512 9614c4188c9a5bcf398d1f521b52d7e2281fcdf76265fdaca4acda22be282d8468e82b54a2661d5753f4b9a442ebe93a60daf87c846db4e275a283f71c9fd8e2 +AUX clvmd.rc-2.02.39 3590 BLAKE2B 6ea7d9a112a98baed0c8d96e19804cadc82cc326fd6db00947631f3ef10791f0cf7888a250aeb8e37b6149302b26310c305c4a46cb8eef2dee00f0d0238c9943 SHA512 2a16b700f475a65477d548b4cb5fb26129c86d2244b7b5716ffdb4e9b13cf2e37bc1fc986c080c5c4d1c0e2b5436b0cc6fcb0527c9b98c1b29b85ca512551532 +AUX device-mapper.conf-1.02.22-r3 15 BLAKE2B c8954f4cad3090e95c8ab985f7f93b65add66b9014351aab82d270c371c3b7571a73b37b2002664b50c21bb7dd494c7196857de75b41ca534cb15e0127f080ae SHA512 1846e0ca1be7170d4c0beb694a23aea4d19b24b99a248bb0f4e034286a6beede0a8efc474b0c237e33ee72c86c93b6238f2d5ea23e224765acba99c90633261e +AUX device-mapper.rc-2.02.105-r2 3707 BLAKE2B 1f1f38fd377e77e082985146de8a32fb88f794e4db28d6790cccbc6a87b63b0d28617e5fa7eb4974e2dcf8a80265accf8b69ff0719fa3de1c6788e7d5a1bd705 SHA512 9940b1154a8c07cf2f2c975e209bfb1e78913d3ea77ac6334684a9b38c4f4bd34b349b71c078c9ad5700f554046771ee05e17f07b75dc4e7d839f1df2305cc4f +AUX dmeventd.initd-2.02.67-r1 565 BLAKE2B ca1f5d205191076114d4a89717b304df04a520a22630ed84e78550e83b9364e049457bacfcadcc8ca1328a78c97412a445fcf153871266355379eab423c38138 SHA512 c0f5317ab0cba700eab3b643fd134d8a23fe4b332c47fd94728e43dfdf97250561f60ecb47808d2c65e55cdec65cccbd51f264540c0d973b2df7ded4ec129c34 +AUX dmtab 319 BLAKE2B 5753b72e44325e467c0e4ea1bbce8faafe1c5e2509d2e02a5ad428b39e531c655014a3b151f7bc57513aae74983a60cfe3034432ffd21d39716fc6893ec7da8f SHA512 a8cc69ff832eafd64d7e45854df3380a9c5f9648297e2606c5b9b47e0015c93c7da6ef3dfd35800f36a3371635fa1906605c524be82d6740fd435c7f6bf2807b +AUX lvm-monitoring.initd-2.02.105-r2 963 BLAKE2B 2a193578c642e05a2a492fb025bdacd2594953405a58517bf6a93a04db29be03e16a33b2c5cd57c463f55f30fd47a4fb7766f52b149a298db4dcefed4ed30012 SHA512 dc13304e8d644a55f0490c84acc36b95f43fc0e86c4b44f85f54f6ed3213ad665454e7432b3621f307b3468af0c33525c24705f4a2783e35a26e02ff1c828779 +AUX lvm.confd-2.02.28-r2 173 BLAKE2B 4b9d115ed31b3777bd3c925b75bd0ebb186bace92b6d294e6a1ff7cdb7c206374a06738a73edc401a5547016a08721013fe3ad66b52d8cf08de75d030813ab2d SHA512 67b153cbc5c2327c15f042b3b5590c1d8fdf9823efb19c80192ac4dcf98e530efea8ecae0aaaa4a54b0e3e4907565aa21455b364df1dbe8f2e7dffa1c5d355d0 +AUX lvm.rc-2.02.172 4207 BLAKE2B 9c3e4ca320fda3ae587d908f416f8730c8965f3eea1b79fdd9453c505793870d7ceea0a8f305efaf8579805c773cffac084bc62854eb7a61bceec7f29c3bb183 SHA512 8aff8ed7f854dd326dd78c4862cd0a518deed10e05533d0a17fe47c18db8bf29b26799950f534b52aeabacd3fb70d83f12c523cab0a0f2d669aa0ff9d3fa1832 +AUX lvm2-2.02.129-example.conf.in.patch 1844 BLAKE2B 60e717f172557800c9a797309188b88bd601f3491d54d7dc0320e40b4b4825c20b70e07f9737d3e109746523c16ec29519f18fae10e9c56b3a936e082b8e308d SHA512 a2bceec0d051fd2f7749e702d6bbabbc0edf98b11b3211256d2a49d781b1fe89071f36052045726b11b0e0bdd98242b88fc57128a048a7d6d6448c298a6233ed +AUX lvm2-2.02.166-HPPA-no-O_DIRECT.patch 285 BLAKE2B 0311aab5b4ac843ff36fb7c4dbb8f47538fb621848f8430118dbbbcdfbf64876098ce9732109dca00e9262551b12a0e3293f0edfbb82dadf2d442f448dd695a3 SHA512 e113c31400d9f382b89901be199dfd3dd3888e0b417fb080d381d2aab79ac522dc968fda6aa7fd7668d018fd9109be133252cce01825bf950a79da145ff8b240 +AUX lvm2-2.02.176-pthread-pkgconfig.patch 822 BLAKE2B 9c5d89a70c0a7074d689f8f50a1f811b91fe8a64b564e22426bce4574be165765b3640f8dc650e4ae047340a03390fc70faff0cd78ef5251063d28030e1f495f SHA512 d96f579bbdc56b8288fa01e6c416bfcf229c92b659102edd1aa10c9ae1c35eeecb4299bce161218dae423995431e8a12a2a78a80a868b79744f74053ec2f9bd2 +AUX lvm2-2.02.183-fix-stdio-usage.patch 870 BLAKE2B e92a605f5adffe8d63b330450b2d65f29745f869e5bb360641e4af7dc2ada066bbd227ada28cc5d5f536193acebc662b46cb73bf154f246e7235e43a4dc4963c SHA512 505205665bbef9faa55bd1081897a5c561dc5093eec799a744e57aabccf4dff20cb72ea6ada232a04d63e6a5ccc45905f575c7bcc39819a4170fdeb4050ddde0 +AUX lvm2-2.02.183-implement-libc-specific-reopen_stream.patch 646 BLAKE2B cc229e506d2f5f10d64e579e404b845525b9a26b32d7e6d87274f500f90dd5b0e7f25ac5d7b89623c06c08e6d8e7161d05477ddb1249a73cca4e6081006951b2 SHA512 f7941f0a4f61b62b218c5635ca86dc79f9cd77b30dc391509ee41635c957e3f06041bf45b12eff8894b22377684dcb93a648385d062a9b2fa2322add3513942a +AUX lvm2-2.02.183-portability.patch 567 BLAKE2B e165297ec7c9bf65bf0f460e9a03da5733b816c59dda852800dcfe7d141304fec4b8955c863f6708d49ce1a58380ddf0d17916c26e305ddfccb06fa499415c5f SHA512 9595a6760e0eeae44f58733e775c572cce24e95bb78db1bafd534a906d19b937a48358d9b75d34e1d22473da1a70f275fcdd1e7fbe2f97c4f6ef7cdef2df285b +AUX lvm2-2.02.56-lvm2create_initrd.patch 2032 BLAKE2B 5533ceb7a601d58995e7a90b1355508907edb30d14704b397a8c8ba0d66dbcd3d6b02ace1cadef1dfbb1d927449403f76f0f38e5d034344b3232deb512507cb6 SHA512 b2a1705fa6b962027ebc5047583547489afe8ef8d8977c6284a28d0a8b0e05e20e6c48bd6c02a8bb02de9cfb40ac2d6e2a4b8ed8ef8c4ae7b6ea9a29bc4194de +AUX lvm2-2.02.63-always-make-static-libdm.patch 1420 BLAKE2B baf7010b5965f5c2b9a32ec812cb259cb3ceccea0d56e48d75e9f8e872634913f160fcfff0c2c77854ddfeaafb3b48bbca16d569041ab6f45aecb950f8e5bf4a SHA512 67735af9e51369d5b3b400cab4f9ffa25f8dea1c1ec3d01855cb3c5aeade5c39a35eeed43f3a665204fe6bbba4ca43baecd845330bf26d023064b94ca3d1317c +AUX lvm2-2.02.67-createinitrd.patch 660 BLAKE2B 23e784e6769bc1f47fa57d690e6bebdf16d784d775a06af1c8eb7c54dd63a12abb0edd8331c8d033d7a0dda058252453a46dd35bd820fd47ba1407e9568b3858 SHA512 17fbba5d34ece5c1c25ef35fa3bbc3d6fcd20b44bd766c049bbc120853a8d60c9544db5790645a7814db5c272fd12d383699a8a9be6f4e9c56a7c0a1bb29ade2 +AUX lvm2-2.02.99-locale-muck.patch 405 BLAKE2B 07ac7c7f54d06dbdeae1c6bf0959fd0c223b30cbd67c08f853e02f520d212f7b6dcf7c3b6c3d3b7370bb004adbb23b226bf0d0792b5799ddbaff5ab655124ca2 SHA512 1c898693f71d165d55458ab87886a25206930c202b5aea95eba394ad06162cc710c1435e598acb9bcd3fbf46abf5409be972f6ce73bd02b2e177e1af780ae7ad +AUX lvm2-2_02_178-lvmlockd-fix-uninitialized.patch 521 BLAKE2B 5cb393f62a298985a5034446ecf390f031bd228fb70233e2243742a7b403b4b98cf463412e9dcd2a08ddf6e8855ddda3a26b4bf2f861d29c4363b5fb2a3e4ede SHA512 f0eb17cb9ffe3ae3193142e9082a7b0f53c05effcf020c627a01b81d3733efacdd4e7d7b17e147b9ddfca61eb7ed8ebdf6fdeb7db5d54210ed936a7dcf741f1f +AUX lvm2-2_02_180-filter-use-valid-pointers.patch 720 BLAKE2B f5025cbc71b32435d4fd243367cb3c298d2bcb4e28a7e0647c72d1e2bf120587030e786985074aee970cf323739b5f72ba90f6245ab7d464f1926590fe097732 SHA512 c1303ecd83136387c5ee0781de7b64a83ebf06b3c990b84dcd93ed183b1e830ea8fc94a76e08dd0cfc34fdb723607d79124451f5218cb77b199745d7d0d55445 +AUX lvm2-lvmetad-timeout.patch 583 BLAKE2B 7a72fa79309d6c34484a247f4cdacfc0aa6447a2ca5ebf55a145612c131d85c79086237e397c7b60188d0f282014f3d0570c946dd3a98d9c84588e7cab41fcfe SHA512 e94b6eb6e583d893c47242b9c796e898feaef0b58c2e6fc2060f3f828936bc71560ea836576c5f9be738df0f8f5b61a7525a7d94d6813a067f0a50f64c78435e +AUX lvm2-set-default-preferred_names.patch 1535 BLAKE2B f35b29e3bc352f4963ba8f147ef87320fb1b133f8a27f3858200046dc746b72540e3b333b2475e113052a71faa11011579d35b8809b9630653b9ccebb3af5f64 SHA512 4495642b851a4f19c1f2017a270ad3383e55aca4506f55aa39d351c7e6817bbc401328ac8ef323435baf5b5a6a59d479dc2d9b8242cdaf597ef11d26907acdaf +AUX lvmetad.initd-2.02.105-r2 287 BLAKE2B 613baa6c794a971257ea25061d51ce2923475e919c6753e99e8fd2f7e8542ac48b1207f851c3c200b7a4113a62ef5bc2dc5507bcd5ad6c47bec8c9a3abc1ad63 SHA512 5fe1a47a1c54546af70c64fc001db3111e519cb81d8672761b64f50b4c552d0fa79bd0770fb4f4f3e0e0ac584b1e13ea91ac1a33cea1cc1f484cff0dde1a3b0b +AUX lvmetad.initd-2.02.116-r3 348 BLAKE2B 6ad8f51dc6498703840a0917cdbcb5d1f179e2f8f0b2bc06f08e1c65e0dce2e63da3ca7295a8fcfc01019724bc9468d9d1338f3c2d879b4446980b5aa3e10441 SHA512 19aafd07aa6ebe3f05e321048480f746a9aafd1ad4e0323486db5c54035430f607e171d2246e91bbbf8a2a7e15278d793ad13d84e824df7af65345070483a696 +AUX lvmlockd.initd-2.02.166-r1 393 BLAKE2B 83eb337aa1069e66d7746b23141da24717303552016497d29d4df304bb174b2c380cc7c09df7b3529e355cf172150c7cf254afb984a6561e1fa3459aeed43421 SHA512 11d6f186799d8628220eccb4823e5bd251bc3c447e6c3f8a63c025dc4e08e0a7638a8439967ea2ee8a717264887597be4992afca59571ebaa651441782288081 +DIST LVM2.2.02.177.tgz 2378651 BLAKE2B f68153b916c51e1f43fa24c954270e5bac6b7df5cf1699d800a508cd4c1bc90a7b9a8b9b6614f84d36eca88cefef759dd3a724b0894d16dcbd81805f2955018e SHA512 e287aeae3ce5ce0efcdebce90f24c2f659cd8691839e3f3cb902848535259ae510ec48f5355481b99f7285d9cff01883e6ef2b101072bdf9c99fba8e9cb54ded +EBUILD lvm2-2.02.177.ebuild 9995 BLAKE2B ed3692bc64c771ad4f2f0f7c9ea0998a4e931dbd31da0650528a66ef001356c4e90800170478db0a956bbb5f3131ce7fbdcb4b2d98001a770955b841834f8a0f SHA512 b7d10a5e6f403ceb1557efe5033ddb9583f6fba5c334ab476dba95ebe73c8b7034cb03fe441ded0925d439e0b6b56fd055afe04c180773deb4d690a22f543381 +MISC metadata.xml 1397 BLAKE2B fb780193c777b248648d09cc4c0f287f07b64df79912a4c1c37b5c456f8fc8ea98470c03501619432bddb5df1e3f877178a0c7e630b295a01a3bfc27fa63520e SHA512 1ed97dbef323b6703097c20de99e9003c88663a887bcf87c9489baddfa180aa3d8645e4e60cd3eb3b9505603997ac3ab98a7ee96a813b77b9dc25862dd332d35 diff --git a/sys-fs/lvm2/files/clvmd.confd-2.02.39 b/sys-fs/lvm2/files/clvmd.confd-2.02.39 new file mode 100644 index 0000000..5782170 --- /dev/null +++ b/sys-fs/lvm2/files/clvmd.confd-2.02.39 @@ -0,0 +1,9 @@ +# CLVMD_CLUSTER_TIMEOUT -- amount of time to wait for cluster quorum. + +CLVMD_CLUSTER_TIMEOUT=30 + + +# CLVMD_NODES_TIMEOUT -- amount of time to wait for the other nodes to +# join the cluster. + +CLVMD_NODES_TIMEOUT=60 diff --git a/sys-fs/lvm2/files/clvmd.rc-2.02.39 b/sys-fs/lvm2/files/clvmd.rc-2.02.39 new file mode 100644 index 0000000..efadd89 --- /dev/null +++ b/sys-fs/lvm2/files/clvmd.rc-2.02.39 @@ -0,0 +1,145 @@ +#!/sbin/openrc-run +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +[ -x /usr/sbin/clvmd ] && CLVMD_BIN="/usr/sbin/clvmd" || CLVMD_BIN="/sbin/clvmd" + +[ -z "$CLVMD_CLUSTER_TIMEOUT" ] && CLVMD_CLUSTER_TIMEOUT=30 +[ -n "$CLVMD_NODES_TIMEOUT" ] || CLVMD_NODES_TIMEOUT=60 + +VGCHANGE="/sbin/vgchange" +VGSCAN="/sbin/vgscan" +VGDISPLAY="/sbin/vgdisplay" +CLVMD_PIDFILE="/var/run/clvmd.pid" + +depend() { + use net dns logger dmeventd + want cman corosync openais +} + +load_modules() { + local module modules + modules=$1 + + for module in ${modules}; do + ebegin "Loading ${module} kernel module" + modprobe ${module} + eend $? "Failed to load ${module} kernel module" + done +} + +unload_modules() { + local module modules + modules=$1 + + for module in ${modules}; do + ebegin "Unloading ${module} kernel module" + modprobe -r ${module} + eend $? "Failed to unload ${module} kernel module" + done +} + +umount_gfs_filesystems() { + local sig retry + local remaining="$(awk '$3 == "gfs" { print $2 }' /proc/mounts | sort -r)" + + if [ -n "${remaining}" ] + then + sig= + retry=3 + while [ -n "${remaining}" -a "${retry}" -gt 0 ] + do + if [ "${retry}" -lt 3 ] + then + ebegin "Unmounting GFS filesystems (retry)" + umount ${remaining} &>/dev/null + eend $? "Failed to unmount GFS filesystems this retry" + else + ebegin "Unmounting GFS filesystems" + umount ${remaining} &>/dev/null + eend $? "Failed to unmount GFS filesystems" + fi + remaining="$(awk '$3 == "gfs" { print $2 }' /proc/mounts | sort -r)" + [ -z "${remaining}" ] && break + /bin/fuser -k -m ${sig} ${remaining} &>/dev/null + sleep 5 + retry=$((${retry} -1)) + sig=-9 + done + fi +} + + +start_volumes() { + ebegin "Scanning LVM volumes" + $VGSCAN > /dev/null 2>&1 + eend $? + + ret=$? + if [ "$ret" -eq 5 ] + then + einfo " Waiting for other nodes to join the cluster ($CLVMD_NODES_TIMEOUT seconds)" + fi + + clustervgs=`$VGDISPLAY 2> /dev/null | awk 'BEGIN {RS="VG Name"} {if (/Clustered/) print $1;}'` + for vg in $clustervgs; do + ebegin " Activating Clustered VG: ${vg} " + + wait=0 + while [ -n "$($VGCHANGE -a y ${vg} 2>&1 |grep "clvmd not running")" ]; do + if [ $wait -lt $CLVMD_NODES_TIMEOUT ]; then + sleep 3 + wait=$(($wait + 3)) + else + eend 1 + fi + done + eend 0 + done +} + +stop_volumes() { + # Deactivate only clustered volumes + clustervgs=`$VGDISPLAY 2> /dev/null | awk 'BEGIN {RS="VG Name"} {if (/Clustered/) print $1;}'` + for vg in $clustervgs; do + ebegin " Shutting Down Clustered VG: ${vg} " + $VGCHANGE -anl ${vg} >/dev/null + eend $? + done +} + + +start() { + local module=$(awk '$1 == "dm_mod" { print $1 }' /proc/{modules,devices}) + + if [ -z "${module}" ]; then + load_modules "dm-mod" + sleep 1s + fi + + ebegin "Starting clvmd ($CLVMD_CLUSTER_TIMEOUT seconds)" + + start-stop-daemon --start --quiet --exec ${CLVMD_BIN} -- -T ${CLVMD_CLUSTER_TIMEOUT} + eend $? + + start_volumes +} + +stop() { + + # umount GFS filesystems + umount_gfs_filesystems + + #stop_volumes + + ebegin "Stopping clvmd" + #start-stop-daemon --stop -s TERM --quiet --exec ${CLVMD_BIN} --name clvmd + killall -TERM ${CLVMD_BIN} >/dev/null + eend $? + + #local module=$(awk '$1 == "dm_mod" { print $1 }' /proc/modules) + + #if [[ "$?" -eq 0 && ! -z "${module}" ]]; then + # unload_modules "dm-mod" + #fi +} diff --git a/sys-fs/lvm2/files/device-mapper.conf-1.02.22-r3 b/sys-fs/lvm2/files/device-mapper.conf-1.02.22-r3 new file mode 100644 index 0000000..bc7a251 --- /dev/null +++ b/sys-fs/lvm2/files/device-mapper.conf-1.02.22-r3 @@ -0,0 +1 @@ +RC_AFTER="lvm" diff --git a/sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2 b/sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2 new file mode 100644 index 0000000..7dbacce --- /dev/null +++ b/sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2 @@ -0,0 +1,146 @@ +#!/sbin/openrc-run +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +depend() { + # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that + # means dmeventd is NOT notified, as it cannot be safely running + before dmeventd checkfs fsck + after modules +} + +dm_in_proc() { + local retval=0 + for x in devices misc ; do + grep -qs 'device-mapper' /proc/${x} + retval=$((${retval} + $?)) + done + return ${retval} +} + +# char **build_dmsetup_command(volume) +# +# Returns complete dmsetup command given single volume name +build_dmsetup_command() { + local count dmsetup_cmd + + # Number of lines mentioning volume name + count=$(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | grep -c ${1}) + + # If there's just one line: + if [ ${count} -eq 1 ] ; then + echo "echo $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ + grep ${1} | awk '{$1=""; print $0}') | /sbin/dmsetup create ${1}" + + # For all cases with more lines: + elif [ ${count} -gt 1 ] ; then + for c in $( seq 1 ${count} ) ; do + if [ ${c} -eq 1 ] ; then + # Heavy escaping in awk-statement because we cannot use apostrophes + dmsetup_cmd="echo -e $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ + grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})" + else + # Append starting with newline + dmsetup_cmd="${dmsetup_cmd}\\\\n \ + $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ + grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})" + fi + done + echo "${dmsetup_cmd} | /sbin/dmsetup create ${1}" + fi + + return 0 +} + +# char **get_new_dm_volumes(void) +# +# Return unique volumes from /etc/dmtab +get_new_dm_volumes() { + local volume + + # Filter comments and blank lines + grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ + awk '{ print $1 }' | \ + uniq | \ + while read volume ; do + # If it exists, skip it + dmvolume_exists "${volume%:}" && continue + + echo "${volume%:}" + done + + return 0 +} + +# int dmvolume_exists(volume) +# +# Return true if volume exists in DM table +dmvolume_exists() { + local x line volume=$1 + + [ -z "${volume}" ] && return 1 + + /sbin/dmsetup ls 2>/dev/null | \ + while read line ; do + for x in ${line} ; do + # the following conditonal return only breaks out + # of the while loop, as it is running in a pipe. + [ "${x}" = "${volume}" ] && return 1 + # We only want to check the volume name + break + done + done + + # if 1 was returned from the above loop, then indicate that + # volume exists + [ $? = 1 ] && return 0 + + # otherwise the loop exited normally and the volume does not + # exist + return 1 +} + +# int is_empty_dm_volume(volume) +# +# Return true if the volume exists in DM table, but is empty/non-valid +is_empty_dm_volume() { + local table volume=$1 + + set -- $(/sbin/dmsetup table 2>/dev/null | grep -e "^${volume}:") + [ "${volume}" = "$1" -a -z "$2" ] +} + + +start() { + if [ -e /proc/modules ] && ! dm_in_proc ; then + modprobe dm-mod 2>/dev/null + fi + # Ensure the dirs exist for locking and running + checkpath -q -d -m 0700 -o root:root /run/lvm /run/lock/lvm + + local x volume + + if [ -x /sbin/dmsetup -a -c /dev/mapper/control -a -f /etc/dmtab ] ; then + [ -n "$(get_new_dm_volumes)" ] && \ + einfo " Setting up device-mapper volumes:" + + get_new_dm_volumes | \ + while read x ; do + [ -n "${x}" ] || continue + + volume="${x##* }" + + ebegin " Creating volume: ${volume}" + if ! eval $(build_dmsetup_command ${volume}) >/dev/null 2>/dev/null ; then + eend 1 " Error creating volume: ${volume}" + # dmsetup still adds an empty volume in some cases, + # so lets remove it + is_empty_dm_volume "${volume}" && \ + /sbin/dmsetup remove "${volume}" 2>/dev/null + else + eend 0 + fi + done + fi +} + diff --git a/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1 b/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1 new file mode 100644 index 0000000..930e84b --- /dev/null +++ b/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1 @@ -0,0 +1,25 @@ +#!/sbin/openrc-run +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +PIDFILE=/run/dmeventd.pid +BIN=/sbin/dmeventd + +depend() { + # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that + # means dmeventd is NOT notified, as it cannot be safely running + after lvm device-mapper +} + +start() { + ebegin "Starting dmeventd" + start-stop-daemon --start --exec $BIN --pidfile $PIDFILE + eend $? +} + +stop() { + ebegin "Stopping dmeventd" + start-stop-daemon --stop --exec $BIN --pidfile $PIDFILE + eend $? +} + diff --git a/sys-fs/lvm2/files/dmtab b/sys-fs/lvm2/files/dmtab new file mode 100644 index 0000000..37a0d28 --- /dev/null +++ b/sys-fs/lvm2/files/dmtab @@ -0,0 +1,11 @@ +#/etc/dmraid: config file for adding device-mapper volumes at boot + +# Format: : +# Example: isw0: 0 312602976 striped 2 128 /dev/sda 0 /dev/sdb 0 +# +# Alternatively you can create all your volumes the first time, and just run: +# +# dmsetup table >> /etc/dmtab +# +# and verify that they are correct. + diff --git a/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2 b/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2 new file mode 100644 index 0000000..d603718 --- /dev/null +++ b/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2 @@ -0,0 +1,38 @@ +#!/sbin/openrc-run +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +# This script is based on upstream file +# LVM2.2.02.67/scripts/lvm2_monitoring_init_red_hat.in + +depend() { + # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that + # means dmeventd is NOT notified, as it cannot be safely running + need lvm dmeventd +} + +VGCHANGE=/sbin/vgchange +VGS=/sbin/vgs + +start() { + ret=0 + # TODO do we want to separate out already active groups only? + VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null` + ebegin "Starting LVM monitoring for VGs ${VGSLIST}:" + $VGCHANGE --monitor y --poll y ${VGSLIST} + ret=$? + eend $ret + return $ret + +} + +stop() { + ret=0 + # TODO do we want to separate out already active groups only? + VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null` + ebegin "Stopping LVM monitoring for VGs ${VGSLIST}:" + $VGCHANGE --monitor n ${VGSLIST} + ret=$? + eend $ret + return $ret +} diff --git a/sys-fs/lvm2/files/lvm.confd-2.02.28-r2 b/sys-fs/lvm2/files/lvm.confd-2.02.28-r2 new file mode 100644 index 0000000..2fbd866 --- /dev/null +++ b/sys-fs/lvm2/files/lvm.confd-2.02.28-r2 @@ -0,0 +1,5 @@ +# LVM should normally only be started after mdraid is available +# this is because LVM physical volumes are very often MD devices. +RC_AFTER="mdraid" + +# vim: ft=gentoo-conf-d diff --git a/sys-fs/lvm2/files/lvm.rc-2.02.172 b/sys-fs/lvm2/files/lvm.rc-2.02.172 new file mode 100644 index 0000000..9e22c28 --- /dev/null +++ b/sys-fs/lvm2/files/lvm.rc-2.02.172 @@ -0,0 +1,145 @@ +#!/sbin/openrc-run +# Copyright 1999-2017 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +_get_lvm_path() { + local lvm_path= + for lvm_path in /bin/lvm /sbin/lvm ; do + [ -x "$lvm_path" ] && break + done + echo "${lvm_path}" +} + +_need_lvmetad() +{ + local lvm_path="$(_get_lvm_path)" + [ ! -x "${lvm_path}" ] && return 1 + ${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmetad=1' +} + +_need_lvmlockd() +{ + local lvm_path="$(_get_lvm_path)" + [ ! -x "${lvm_path}" ] && return 1 + ${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmlockd=1' +} +depend() { + before checkfs fsck + after modules device-mapper + # We may use lvmetad based on the configuration. If we added lvmetad + # support while lvm2 is running then we aren't dependent on it. For the + # more common case, if its disabled in the config we aren't dependent + # on it. + config /etc/lvm/lvm.conf + local _need= + if service_started; then + _need=$(service_get_value need) + else + if _need_lvmetad; then + _need="${_need} lvmetad" + fi + if _need_lvmlockd; then + _need="${_need} lvmlockd" + fi + fi + need sysfs ${_need} +} + +config='global { locking_dir = "/run/lock/lvm" }' + +dm_in_proc() { + local retval=0 + for x in devices misc ; do + grep -qs 'device-mapper' /proc/${x} + retval=$((${retval} + $?)) + done + return ${retval} +} + +start() { + # LVM support for /usr, /home, /opt .... + # This should be done *before* checking local + # volumes, or they never get checked. + + # NOTE: Add needed modules for LVM or RAID, etc + # to /etc/modules.autoload if needed + lvm_path="$(_get_lvm_path)" + for lvm_path in /bin/lvm /sbin/lvm ; do + [ -x "$lvm_path" ] && break + done + if [ ! -x "$lvm_path" ]; then + eerror "Cannot find lvm binary in /sbin or /bin!" + return 1 + fi + if [ -z "${CDBOOT}" ] ; then + if [ -e /proc/modules ] && ! dm_in_proc ; then + modprobe dm-mod 2>/dev/null + fi + if [ -d /proc/lvm ] || dm_in_proc ; then + ebegin "Setting up the Logical Volume Manager" + #still echo stderr for debugging + lvm_commands="#!${lvm_path}\n" + # Extra PV find pass because some devices might not have been available until very recently + lvm_commands="${lvm_commands}pvscan --config '${config}'\n" + # Now make the nodes + lvm_commands="${lvm_commands}vgscan --config '${config}' --mknodes\n" + # And turn them on! + lvm_commands="${lvm_commands}vgchange --config '${config}' --sysinit -a ly\n" + if _need_lvmlockd; then + # Start lockd VGs as required + lvm_commands="${lvm_commands}vgchange --config '${config}' --lock-start --lock-opt auto\n" + fi + # Order of this is important, have to work around dash and LVM readline + printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 >/dev/null + eend $? "Failed to setup the LVM" + fi + fi +} + +start_post() +{ + # Save if we needed lvmetad + if _need_lvmetad; then + service_set_value need lvmetad + fi +} + +stop() { + for lvm_path in /bin/lvm /sbin/lvm ; do + [ -x "$lvm_path" ] && break + done + if [ ! -x "$lvm_path" ]; then + eerror "Cannot find lvm binary in /sbin or /bin!" + return 1 + fi +# Stop LVM2 +if [ -x /sbin/vgs ] && \ + [ -x /sbin/vgchange ] && \ + [ -x /sbin/lvchange ] && \ + [ -f /etc/lvmtab -o -d /etc/lvm ] && \ + [ -d /proc/lvm -o "`grep device-mapper /proc/misc 2>/dev/null`" ] +then + einfo "Shutting down the Logical Volume Manager" + + VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix --rows 2> /dev/null) + + if [ "$VGS" ] + then + ebegin " Shutting Down LVs & VGs" + #still echo stderr for debugging + lvm_commands="#!${lvm_path}\n" + # Extra PV find pass because some devices might not have been available until very recently + lvm_commands="${lvm_commands}lvchange --config '${config}' --sysinit -a ln ${VGS}\n" + # Now make the nodes + lvm_commands="${lvm_commands}vgchange --config '${config}' --sysinit -a ln ${VGS}\n" + # Order of this is important, have to work around dash and LVM readline + printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null + eend $? "Failed (possibly some LVs still needed for /usr or root)" + fi + + einfo "Finished shutting down the Logical Volume Manager" + return 0 +fi +} + +# vim:ts=4 diff --git a/sys-fs/lvm2/files/lvm2-2.02.129-example.conf.in.patch b/sys-fs/lvm2/files/lvm2-2.02.129-example.conf.in.patch new file mode 100644 index 0000000..076e060 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.129-example.conf.in.patch @@ -0,0 +1,52 @@ +Maintainer note: Forward ported without editing from lvm2-2.02.108-example.conf.in.patch to apply cleanly. + +--- LVM2.2.02.129/conf/example.conf.in ++++ LVM2.2.02.129/conf/example.conf.in +@@ -128,6 +128,9 @@ + # Example + # Accept every block device: + # filter = [ "a|.*/|" ] ++ # Gentoo: we exclude /dev/nbd by default, because it makes a lot of kernel ++ # noise when you probed while not available. ++ filter = [ "r|/dev/nbd.*|", "a/.*/" ] + # Reject the cdrom drive: + # filter = [ "r|/dev/cdrom|" ] + # Work with just loopback devices, e.g. for testing: +@@ -620,7 +623,8 @@ + # tools need to be installed with .lvm1 suffices, e.g. vgscan.lvm1. + # They will stop working once the lvm2 on-disk metadata format is used. + # This configuration option has an automatic default value. +- # fallback_to_lvm1 = @DEFAULT_FALLBACK_TO_LVM1@ ++ # Gentoo: the LVM tools are a seperate package. ++ fallback_to_lvm1 = 0 + + # Configuration option global/format. + # The default metadata format that commands should use. +@@ -1413,7 +1417,7 @@ + + # Configuration section metadata. + # This configuration section has an automatic default value. +-# metadata { ++metadata { + + # Configuration option metadata/pvmetadatacopies. + # Number of copies of metadata to store on each PV. +@@ -1431,7 +1435,8 @@ + # + # This configuration option is advanced. + # This configuration option has an automatic default value. +- # pvmetadatacopies = 1 ++ # Gentoo: enable for data safety, but PV resize is then disabled. ++ # pvmetadatacopies = 2 + + # Configuration option metadata/vgmetadatacopies. + # Number of copies of metadata to maintain for each VG. +@@ -1486,7 +1491,7 @@ + # + # This configuration option is advanced. + # This configuration option does not have a default value defined. +-# } ++} + + # Configuration section report. + # LVM report command output formatting. diff --git a/sys-fs/lvm2/files/lvm2-2.02.166-HPPA-no-O_DIRECT.patch b/sys-fs/lvm2/files/lvm2-2.02.166-HPPA-no-O_DIRECT.patch new file mode 100644 index 0000000..0f830e4 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.166-HPPA-no-O_DIRECT.patch @@ -0,0 +1,12 @@ +--- a/lib/device/dev-io.c ++++ b/lib/device/dev-io.c +@@ -505,7 +505,9 @@ + dev->flags |= DEV_NOT_O_NOATIME; + if ((dev->fd = open(name, flags, 0777)) >= 0) { + log_debug_devs("%s: Not using O_NOATIME", name); ++#ifdef O_DIRECT_SUPPORT + goto opened; ++#endif + } + } + #endif diff --git a/sys-fs/lvm2/files/lvm2-2.02.176-pthread-pkgconfig.patch b/sys-fs/lvm2/files/lvm2-2.02.176-pthread-pkgconfig.patch new file mode 100644 index 0000000..c0265e8 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.176-pthread-pkgconfig.patch @@ -0,0 +1,29 @@ +--- LVM2.2.02.176/libdm/libdevmapper.pc.in ++++ LVM2.2.02.176/libdm/libdevmapper.pc.in +@@ -9,4 +9,4 @@ + Cflags: -I${includedir} + Libs: -L${libdir} -ldevmapper + Requires.private: @SELINUX_PC@ @UDEV_PC@ +-Libs.private: -lm @RT_LIBS@ ++Libs.private: -lm @RT_LIBS@ @PTHREAD_LIBS@ +--- LVM2.2.02.176/tools/Makefile.in ++++ LVM2.2.02.176/tools/Makefile.in +@@ -93,6 +93,7 @@ + INSTALL_LVM_TARGETS += install_tools_static + INSTALL_DMSETUP_TARGETS += install_dmsetup_static + INSTALL_CMDLIB_TARGETS += install_cmdlib_static ++ STATIC_LIBS += @PTHREAD_LIBS@ + endif + + LVMLIBS = $(LVMINTERNAL_LIBS) -ldevmapper +@@ -118,6 +119,10 @@ + + include $(top_builddir)/make.tmpl + ++ifeq ("@STATIC_LINK@", "yes") ++ STATIC_LIBS += @PTHREAD_LIBS@ ++endif ++ + device-mapper: $(TARGETS_DM) + + CFLAGS_dmsetup.o += $(UDEV_CFLAGS) $(EXTRA_EXEC_CFLAGS) diff --git a/sys-fs/lvm2/files/lvm2-2.02.183-fix-stdio-usage.patch b/sys-fs/lvm2/files/lvm2-2.02.183-fix-stdio-usage.patch new file mode 100644 index 0000000..8564d08 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.183-fix-stdio-usage.patch @@ -0,0 +1,29 @@ +--- a/tools/lvmcmdline.c ++++ b/tools/lvmcmdline.c +@@ -3110,7 +3110,7 @@ static int _check_standard_fds(void) + int err = is_valid_fd(STDERR_FILENO); + + if (!is_valid_fd(STDIN_FILENO) && +- !(stdin = fopen(_PATH_DEVNULL, "r"))) { ++ !freopen(_PATH_DEVNULL, "r", stdin)) { + if (err) + perror("stdin stream open"); + else +@@ -3120,7 +3120,7 @@ static int _check_standard_fds(void) + } + + if (!is_valid_fd(STDOUT_FILENO) && +- !(stdout = fopen(_PATH_DEVNULL, "w"))) { ++ !freopen(_PATH_DEVNULL, "r", stdout)) { + if (err) + perror("stdout stream open"); + /* else no stdout */ +@@ -3128,7 +3128,7 @@ static int _check_standard_fds(void) + } + + if (!is_valid_fd(STDERR_FILENO) && +- !(stderr = fopen(_PATH_DEVNULL, "w"))) { ++ !freopen(_PATH_DEVNULL, "w", stderr)) { + printf("stderr stream open: %s\n", + strerror(errno)); + return 0; diff --git a/sys-fs/lvm2/files/lvm2-2.02.183-implement-libc-specific-reopen_stream.patch b/sys-fs/lvm2/files/lvm2-2.02.183-implement-libc-specific-reopen_stream.patch new file mode 100644 index 0000000..6034be3 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.183-implement-libc-specific-reopen_stream.patch @@ -0,0 +1,24 @@ +diff --git a/lib/log/log.c b/lib/log/log.c +index 79fbd7a..0999d10 100644 +--- a/lib/log/log.c ++++ b/lib/log/log.c +@@ -161,6 +161,7 @@ static void _check_and_replace_standard_log_streams(FILE *old_stream, FILE *new_ + * Close and reopen standard stream on file descriptor fd. + */ + int reopen_standard_stream(FILE **stream, const char *mode) ++#ifdef __GLIBC__ + { + int fd, fd_copy, new_fd; + const char *name; +@@ -207,6 +208,11 @@ int reopen_standard_stream(FILE **stream, const char *mode) + *stream = new_stream; + return 1; + } ++#else ++{ ++ return (freopen(NULL, mode, *stream) != NULL); ++} ++#endif + + void init_log_fn(lvm2_log_fn_t log_fn) + { diff --git a/sys-fs/lvm2/files/lvm2-2.02.183-portability.patch b/sys-fs/lvm2/files/lvm2-2.02.183-portability.patch new file mode 100644 index 0000000..ecdcb1c --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.183-portability.patch @@ -0,0 +1,21 @@ +--- a/lib/mm/memlock.c ++++ b/lib/mm/memlock.c +@@ -159,7 +159,7 @@ static void _touch_memory(void *mem, siz + + static void _allocate_memory(void) + { +-#ifndef VALGRIND_POOL ++#if !defined(VALGRIND_POOL) && defined(__GLIBC__) + void *stack_mem; + struct rlimit limit; + int i, area = 0, missing = _size_malloc_tmp, max_areas = 32, hblks; +--- a/libdaemon/server/daemon-server.c ++++ b/libdaemon/server/daemon-server.c +@@ -18,6 +18,7 @@ + #include "daemon-server.h" + #include "daemon-log.h" + ++#include + #include + #include + #include diff --git a/sys-fs/lvm2/files/lvm2-2.02.56-lvm2create_initrd.patch b/sys-fs/lvm2/files/lvm2-2.02.56-lvm2create_initrd.patch new file mode 100644 index 0000000..59aaa9b --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.56-lvm2create_initrd.patch @@ -0,0 +1,72 @@ +--- LVM2.2.02.56/scripts/lvm2create_initrd/lvm2create_initrd.orig 2006-11-21 22:41:56.000000000 +0000 ++++ LVM2.2.02.56/scripts/lvm2create_initrd/lvm2create_initrd 2009-12-26 01:47:08.025224602 +0000 +@@ -54,7 +54,9 @@ + DEVRAM=/tmp/initrd.$$ + + # set defaults +-BINFILES=${BINFILES:-"`which lvm` `which bash` `which busybox` `which pivot_root`"} ++LVM=`which lvm.static` ++LVM=${LVM:-"`which lvm`"} ++BINFILES=${BINFILES:-"${LVM} `which bash` `which busybox` `which pivot_root`"} + BASICDEVICES=${BASICDEVICES:-"std consoleonly fd"} + BLOCKDEVICES=${BLOCKDEVICES:-"md hda hdb hdc hdd sda sdb sdc sdd"} + MAKEDEV=${MAKEDEV:-"debian"} +@@ -119,6 +121,10 @@ + echo "$PRE Mounting /proc" + mount -t proc none /proc + ++# We need /sys for lvm ++echo "$PRE Mounting /sys" ++mount -t sysfs sysfs /sys ++ + # plug in modules listed in /etc/modules + if [ -f /etc/modules ]; then + echo -n "$PRE plugging in kernel modules:" +@@ -179,26 +185,29 @@ + # run a shell if we're passed lvm2rescue on commandline + grep lvm2rescue /proc/cmdline 1>/dev/null 2>&1 + if [ $? -eq 0 ]; then +- lvm vgchange --ignorelockingfailure -P -a y ++ $LVM vgchange --ignorelockingfailure -P -a y + do_shell + else +- lvm vgchange --ignorelockingfailure -a y ++ $LVM vgchange --ignorelockingfailure -a y + fi + + echo "$PRE Mounting root filesystem $rootvol ro" + mkdir /rootvol + if ! mount -t auto -o ro $rootvol /rootvol; then +- echo "\t*FAILED*"; ++ echo "\t*FAILED TRYING TO MOUNT ROOTVOL*"; + do_shell + fi + + echo "$PRE Umounting /proc" + umount /proc + ++echo "$PRE Umounting /sys" ++umount /sys ++ + echo "$PRE Changing roots" + cd /rootvol + if ! pivot_root . initrd ; then +- echo "\t*FAILED*" ++ echo "\t*FAILED PIVOT TO NEW ROOT*" + do_shell + fi + +@@ -356,7 +365,7 @@ + fi + + verbose "creating basic set of directories in $TMPMNT" +-(cd $TMPMNT; mkdir bin dev etc lib proc sbin var) ++(cd $TMPMNT; mkdir bin dev etc lib proc sbin sys var) + if [ $? -ne 0 ]; then + echo "$cmd -- ERROR creating directories in $TMPMNT" + cleanup 1 +@@ -499,4 +508,3 @@ + FINALTXT + + cleanup 0 +- diff --git a/sys-fs/lvm2/files/lvm2-2.02.63-always-make-static-libdm.patch b/sys-fs/lvm2/files/lvm2-2.02.63-always-make-static-libdm.patch new file mode 100644 index 0000000..5ddcb4e --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.63-always-make-static-libdm.patch @@ -0,0 +1,42 @@ +diff -Nuar --exclude '*~' LVM2.2.02.63.orig/daemons/dmeventd/Makefile.in LVM2.2.02.63/daemons/dmeventd/Makefile.in +--- LVM2.2.02.63.orig/daemons/dmeventd/Makefile.in 2010-04-09 14:42:48.000000000 -0700 ++++ LVM2.2.02.63/daemons/dmeventd/Makefile.in 2010-04-19 11:53:27.000000000 -0700 +@@ -28,11 +28,12 @@ + INSTALL_LIB_TARGETS = install_lib_dynamic + + LIB_NAME = libdevmapper-event ++LIB_STATIC = $(LIB_NAME).a ++INSTALL_LIB_TARGETS += install_lib_static ++TARGETS += $(LIB_STATIC) + ifeq ("@STATIC_LINK@", "yes") +- LIB_STATIC = $(LIB_NAME).a +- TARGETS += $(LIB_STATIC) dmeventd.static ++ TARGETS += dmeventd.static + INSTALL_DMEVENTD_TARGETS += install_dmeventd_static +- INSTALL_LIB_TARGETS += install_lib_static + endif + + LIB_VERSION = $(LIB_VERSION_DM) +diff -Nuar --exclude '*~' LVM2.2.02.63.orig/libdm/Makefile.in LVM2.2.02.63/libdm/Makefile.in +--- LVM2.2.02.63.orig/libdm/Makefile.in 2010-04-09 14:42:51.000000000 -0700 ++++ LVM2.2.02.63/libdm/Makefile.in 2010-04-19 11:52:20.000000000 -0700 +@@ -34,8 +34,8 @@ + + INCLUDES = -I$(srcdir)/$(interface) -I$(srcdir) + +-ifeq ("@STATIC_LINK@", "yes") + LIB_STATIC = $(interface)/libdevmapper.a ++ifeq ("@STATIC_LINK@", "yes") + endif + + LIB_SHARED = $(interface)/libdevmapper.$(LIB_SUFFIX) +@@ -63,8 +63,8 @@ + + INSTALL_TYPE = install_dynamic + +-ifeq ("@STATIC_LINK@", "yes") + INSTALL_TYPE += install_static ++ifeq ("@STATIC_LINK@", "yes") + endif + + ifeq ("@PKGCONFIG@", "yes") diff --git a/sys-fs/lvm2/files/lvm2-2.02.67-createinitrd.patch b/sys-fs/lvm2/files/lvm2-2.02.67-createinitrd.patch new file mode 100644 index 0000000..7f0bfb8 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.67-createinitrd.patch @@ -0,0 +1,18 @@ +X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=301331 +X-Gentoo-Bug: 301331 + +diff -Nuar LVM2.2.02.67.orig/scripts/lvm2create_initrd/lvm2create_initrd LVM2.2.02.67/scripts/lvm2create_initrd/lvm2create_initrd +--- LVM2.2.02.67.orig/scripts/lvm2create_initrd/lvm2create_initrd 2010-06-07 18:44:34.182980475 +0000 ++++ LVM2.2.02.67/scripts/lvm2create_initrd/lvm2create_initrd 2010-06-07 18:51:27.636312899 +0000 +@@ -469,9 +469,9 @@ + rmdir $TMPMNT/lost+found + + echo "$cmd -- ummounting ram disk" +-umount $DEVRAM ++umount $TMPMNT + if [ $? -ne 0 ]; then +- echo "$cmd -- ERROR umounting $DEVRAM" ++ echo "$cmd -- ERROR umounting $TMPMNT" + cleanup 1 + fi + diff --git a/sys-fs/lvm2/files/lvm2-2.02.99-locale-muck.patch b/sys-fs/lvm2/files/lvm2-2.02.99-locale-muck.patch new file mode 100644 index 0000000..fe7ec87 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2.02.99-locale-muck.patch @@ -0,0 +1,11 @@ +--- LVM2/make.tmpl.in ++++ LVM2/make.tmpl.in +@@ -395,7 +395,7 @@ + ( cat $(srcdir)/.exported_symbols; \ + if test x$(EXPORTED_HEADER) != x; then \ + $(CC) -E -P $(INCLUDES) $(DEFS) $(EXPORTED_HEADER) | \ +- $(SED) -ne "/^typedef|}/!s/.*[ *]\($(EXPORTED_FN_PREFIX)_[a-z0-9_]*\)(.*/\1/p"; \ ++ LC_ALL=C $(SED) -ne "/^typedef|}/!s/.*[ *]\($(EXPORTED_FN_PREFIX)_[a-z0-9_]*\)(.*/\1/p"; \ + fi \ + ) > $@ + diff --git a/sys-fs/lvm2/files/lvm2-2_02_178-lvmlockd-fix-uninitialized.patch b/sys-fs/lvm2/files/lvm2-2_02_178-lvmlockd-fix-uninitialized.patch new file mode 100644 index 0000000..efbeb77 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2_02_178-lvmlockd-fix-uninitialized.patch @@ -0,0 +1,13 @@ +diff --git a/lib/locking/lvmlockd.c b/lib/locking/lvmlockd.c +index 0365797..a4684b4 100644 +--- a/lib/locking/lvmlockd.c ++++ b/lib/locking/lvmlockd.c +@@ -2148,7 +2148,7 @@ int lockd_lv_name(struct cmd_context *cmd, struct volume_group *vg, + static int _lockd_lv_thin(struct cmd_context *cmd, struct logical_volume *lv, + const char *def_mode, uint32_t flags) + { +- struct logical_volume *pool_lv; ++ struct logical_volume *pool_lv = NULL; + + if (lv_is_thin_volume(lv)) { + struct lv_segment *pool_seg = first_seg(lv); diff --git a/sys-fs/lvm2/files/lvm2-2_02_180-filter-use-valid-pointers.patch b/sys-fs/lvm2/files/lvm2-2_02_180-filter-use-valid-pointers.patch new file mode 100644 index 0000000..94296e0 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-2_02_180-filter-use-valid-pointers.patch @@ -0,0 +1,25 @@ + lib/filters/filter-persistent.c | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +diff --git a/lib/filters/filter-persistent.c b/lib/filters/filter-persistent.c +index 5bc0861..203c88e 100644 +--- a/lib/filters/filter-persistent.c ++++ b/lib/filters/filter-persistent.c +@@ -26,12 +26,15 @@ struct pfilter { + struct dev_types *dt; + }; + ++static char* _good_device = "good"; ++static char* _bad_device = "bad"; ++ + /* + * The hash table holds one of these two states + * against each entry. + */ +-#define PF_BAD_DEVICE ((void *) 1) +-#define PF_GOOD_DEVICE ((void *) 2) ++#define PF_BAD_DEVICE ((void *) &_good_device) ++#define PF_GOOD_DEVICE ((void *) &_bad_device) + + static int _init_hash(struct pfilter *pf) + { diff --git a/sys-fs/lvm2/files/lvm2-lvmetad-timeout.patch b/sys-fs/lvm2/files/lvm2-lvmetad-timeout.patch new file mode 100644 index 0000000..dc5eb75 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-lvmetad-timeout.patch @@ -0,0 +1,16 @@ + scripts/lvm2_lvmetad_systemd_red_hat.service.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/scripts/lvm2_lvmetad_systemd_red_hat.service.in b/scripts/lvm2_lvmetad_systemd_red_hat.service.in +index 8f4c60d..a1cedd2 100644 +--- a/scripts/lvm2_lvmetad_systemd_red_hat.service.in ++++ b/scripts/lvm2_lvmetad_systemd_red_hat.service.in +@@ -9,7 +9,7 @@ Conflicts=shutdown.target + [Service] + Type=simple + NonBlocking=true +-ExecStart=@SBINDIR@/lvmetad -f ++ExecStart=@SBINDIR@/lvmetad -f -t 3600 + Environment=SD_ACTIVATION=1 + Restart=on-abort + PIDFile=@LVMETAD_PIDFILE@ diff --git a/sys-fs/lvm2/files/lvm2-set-default-preferred_names.patch b/sys-fs/lvm2/files/lvm2-set-default-preferred_names.patch new file mode 100644 index 0000000..1c44605 --- /dev/null +++ b/sys-fs/lvm2/files/lvm2-set-default-preferred_names.patch @@ -0,0 +1,30 @@ + conf/example.conf.in | 2 +- + lib/config/config_settings.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/conf/example.conf.in b/conf/example.conf.in +index c0afcb7..ec12918 100644 +--- a/conf/example.conf.in ++++ b/conf/example.conf.in +@@ -106,7 +106,7 @@ devices { + # Example + # preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ] + # +- # This configuration option does not have a default value defined. ++ preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ] + + # Configuration option devices/filter. + # Limit the block devices that are used by LVM commands. +diff --git a/lib/config/config_settings.h b/lib/config/config_settings.h +index 9017043..c06b6f0 100644 +--- a/lib/config/config_settings.h ++++ b/lib/config/config_settings.h +@@ -205,7 +205,7 @@ cfg(devices_external_device_info_source_CFG, "external_device_info_source", devi + " compiled with udev support.\n" + "#\n") + +-cfg_array(devices_preferred_names_CFG, "preferred_names", devices_CFG_SECTION, CFG_ALLOW_EMPTY | CFG_DEFAULT_UNDEFINED , CFG_TYPE_STRING, NULL, vsn(1, 2, 19), NULL, 0, NULL, ++cfg_array(devices_preferred_names_CFG, "preferred_names", devices_CFG_SECTION, CFG_ALLOW_EMPTY, CFG_TYPE_STRING, "#S^/dev/mpath/#S^/dev/mapper/mpath#S^/dev/[hs]d", vsn(1, 2, 19), NULL, 0, NULL, + "Select which path name to display for a block device.\n" + "If multiple path names exist for a block device, and LVM needs to\n" + "display a name for the device, the path names are matched against\n" diff --git a/sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2 b/sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2 new file mode 100644 index 0000000..c95a47d --- /dev/null +++ b/sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2 @@ -0,0 +1,12 @@ +#!/sbin/openrc-run +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +pidfile="/run/lvmetad.pid" +command="/sbin/lvmetad" +command_args="${LVMETAD_OPTS:=-p ${pidfile}}" +start_stop_daemon_args="--pidfile ${pidfile}" + +depend() { + : +} diff --git a/sys-fs/lvm2/files/lvmetad.initd-2.02.116-r3 b/sys-fs/lvm2/files/lvmetad.initd-2.02.116-r3 new file mode 100644 index 0000000..2efce42 --- /dev/null +++ b/sys-fs/lvm2/files/lvmetad.initd-2.02.116-r3 @@ -0,0 +1,17 @@ +#!/sbin/openrc-run +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +pidfile="/run/lvmetad.pid" +command="/sbin/lvmetad" +command_args="${LVMETAD_OPTS:=-p ${pidfile}}" +start_stop_daemon_args="--pidfile ${pidfile}" + +depend() { + : +} + +start_pre() +{ + checkpath --directory /run/lvm || return 1 +} diff --git a/sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1 b/sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1 new file mode 100644 index 0000000..16e2cc3 --- /dev/null +++ b/sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1 @@ -0,0 +1,17 @@ +#!/sbin/openrc-run +# Copyright 1999-2017 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +pidfile="/run/lvmlockd.pid" +command="/sbin/lvmlockd" +command_args="${LVMLOCKD_OPTS:--p ${pidfile}} ${LVMLOCKD_TYPE:--g sanlock}" +start_stop_daemon_args="--pidfile ${pidfile}" + +depend() { + before sanlock +} + +start_pre() +{ + checkpath --directory /run/lvm || return 1 +} diff --git a/sys-fs/lvm2/lvm2-2.02.177.ebuild b/sys-fs/lvm2/lvm2-2.02.177.ebuild new file mode 100644 index 0000000..418ca59 --- /dev/null +++ b/sys-fs/lvm2/lvm2-2.02.177.ebuild @@ -0,0 +1,303 @@ +# Copyright 1999-2018 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +EAPI=6 +inherit autotools eutils linux-info multilib systemd toolchain-funcs udev flag-o-matic + +DESCRIPTION="User-land utilities for LVM2 (device-mapper) software" +HOMEPAGE="https://sourceware.org/lvm2/" +SRC_URI="ftp://sourceware.org/pub/lvm2/${PN/lvm/LVM}.${PV}.tgz + ftp://sourceware.org/pub/lvm2/old/${PN/lvm/LVM}.${PV}.tgz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86 ~amd64-linux ~x86-linux" +IUSE="readline static static-libs systemd clvm cman corosync lvm1 lvm2create_initrd openais sanlock selinux +udev +thin device-mapper-only" +REQUIRED_USE="device-mapper-only? ( !clvm !cman !corosync !lvm1 !lvm2create_initrd !openais !sanlock !thin ) + systemd? ( udev ) + clvm? ( !systemd )" + +DEPEND_COMMON=" + clvm? ( + cman? ( =sys-cluster/cman-3* ) + corosync? ( sys-cluster/corosync ) + openais? ( sys-cluster/openais ) + =sys-cluster/libdlm-3* + ) + + readline? ( sys-libs/readline:0= ) + sanlock? ( sys-cluster/sanlock ) + systemd? ( >=sys-apps/systemd-205:0= ) + udev? ( >=virtual/libudev-208:=[static-libs?] )" +# /run is now required for locking during early boot. /var cannot be assumed to +# be available -- thus, pull in recent enough baselayout for /run. +# This version of LVM is incompatible with cryptsetup <1.1.2. +RDEPEND="${DEPEND_COMMON} + >=sys-apps/baselayout-2.2 + !=sys-apps/util-linux-2.16 + lvm2create_initrd? ( sys-apps/makedev ) + thin? ( >=sys-block/thin-provisioning-tools-0.3.0 )" +# note: thin- 0.3.0 is required to avoid --disable-thin_check_needs_check +# USE 'static' currently only works with eudev, bug 520450 +DEPEND="${DEPEND_COMMON} + virtual/pkgconfig + >=sys-devel/binutils-2.20.1-r1 + sys-devel/autoconf-archive + static? ( + selinux? ( sys-libs/libselinux[static-libs] ) + udev? ( >=sys-fs/eudev-3.1.2[static-libs] ) + >=sys-apps/util-linux-2.16[static-libs] + )" + +S=${WORKDIR}/${PN/lvm/LVM}.${PV} + +PATCHES=( + # Gentoo specific modification(s): + "${FILESDIR}"/${PN}-2.02.129-example.conf.in.patch + + # Musl fixes + "${FILESDIR}"/${PN}-2.02.183-fix-stdio-usage.patch + "${FILESDIR}"/${PN}-2.02.183-portability.patch + "${FILESDIR}"/${PN}-2.02.183-implement-libc-specific-reopen_stream.patch + + # For upstream -- review and forward: + "${FILESDIR}"/${PN}-2.02.63-always-make-static-libdm.patch + "${FILESDIR}"/${PN}-2.02.56-lvm2create_initrd.patch + "${FILESDIR}"/${PN}-2.02.67-createinitrd.patch #301331 + "${FILESDIR}"/${PN}-2.02.99-locale-muck.patch #330373 + "${FILESDIR}"/${PN}-2.02.176-pthread-pkgconfig.patch #492450 + "${FILESDIR}"/${PN}-2.02.166-HPPA-no-O_DIRECT.patch #657446 + "${FILESDIR}"/${PN}-set-default-preferred_names.patch + "${FILESDIR}"/${PN}-lvmetad-timeout.patch + "${FILESDIR}"/${PN}-2_02_180-filter-use-valid-pointers.patch + "${FILESDIR}"/${PN}-2_02_178-lvmlockd-fix-uninitialized.patch +) + +pkg_setup() { + local CONFIG_CHECK="~SYSVIPC" + + if use udev; then + local WARNING_SYSVIPC="CONFIG_SYSVIPC:\tis not set (required for udev sync)\n" + if linux_config_exists; then + local uevent_helper_path=$(linux_chkconfig_string UEVENT_HELPER_PATH) + if [ -n "${uevent_helper_path}" ] && [ "${uevent_helper_path}" != '""' ]; then + ewarn "It's recommended to set an empty value to the following kernel config option:" + ewarn "CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}" + fi + fi + fi + + check_extra_config + + # 1. Genkernel no longer copies /sbin/lvm blindly. + if use static; then + elog "Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with" + elog "their static versions. If you need the static binaries," + elog "you must append .static to the filename!" + fi +} + +src_prepare() { + default + + sed -i \ + -e "1iAR = $(tc-getAR)" \ + -e "s:CC ?= @CC@:CC = $(tc-getCC):" \ + make.tmpl.in || die #444082 + + sed -i -e '/FLAG/s:-O2::' configure{.in,} || die #480212 + + if use udev && ! use device-mapper-only; then + sed -i -e '/use_lvmetad =/s:0:1:' conf/example.conf.in || die #514196 + elog "Notice that \"use_lvmetad\" setting is enabled with USE=\"udev\" in" + elog "/etc/lvm/lvm.conf, which will require restart of udev, lvm, and lvmetad" + elog "if it was previously disabled." + fi + + sed -i -e "s:/usr/bin/true:$(type -P true):" scripts/blk_availability_systemd_red_hat.service.in || die #517514 + + # Without thin-privision-tools, there is nothing to install for target install_man7: + use thin || { sed -i -e '/^install_lvm2/s:install_man7::' man/Makefile.in || die; } + + eautoreconf +} + +src_configure() { + filter-flags -flto + local myconf=() + local buildmode + + myconf+=( $(use_enable !device-mapper-only dmeventd) ) + myconf+=( $(use_enable !device-mapper-only cmdlib) ) + myconf+=( $(use_enable !device-mapper-only applib) ) + myconf+=( $(use_enable !device-mapper-only fsadm) ) + myconf+=( $(use_enable !device-mapper-only lvmetad) ) + use device-mapper-only && myconf+=( --disable-udev-systemd-background-jobs ) + + # Most of this package does weird stuff. + # The build options are tristate, and --without is NOT supported + # options: 'none', 'internal', 'shared' + if use static; then + buildmode="internal" + # This only causes the .static versions to become available + myconf+=( --enable-static_link ) + else + buildmode="shared" + fi + dmbuildmode=$(use !device-mapper-only && echo internal || echo none) + + # dmeventd requires mirrors to be internal, and snapshot available + # so we cannot disable them + myconf+=( --with-mirrors=${dmbuildmode} ) + myconf+=( --with-snapshots=${dmbuildmode} ) + if use thin; then + myconf+=( --with-thin=internal --with-cache=internal ) + local texec + for texec in check dump repair restore; do + myconf+=( --with-thin-${texec}="${EPREFIX}"/sbin/thin_${texec} ) + myconf+=( --with-cache-${texec}="${EPREFIX}"/sbin/cache_${texec} ) + done + else + myconf+=( --with-thin=none --with-cache=none ) + fi + + if use lvm1; then + myconf+=( --with-lvm1=${buildmode} ) + else + myconf+=( --with-lvm1=none ) + fi + + # disable O_DIRECT support on hppa, breaks pv detection (#99532) + use hppa && myconf+=( --disable-o_direct ) + + if use clvm; then + myconf+=( --with-cluster=${buildmode} ) + # 4-state! Make sure we get it right, per bug 210879 + # Valid options are: none, cman, gulm, all + # + # 2009/02: + # gulm is removed now, now dual-state: + # cman, none + # all still exists, but is not needed + # + # 2009/07: + # TODO: add corosync and re-enable ALL + local clvmd="" + use cman && clvmd="cman" + #clvmd="${clvmd/cmangulm/all}" + use corosync && clvmd="${clvmd:+$clvmd,}corosync" + use openais && clvmd="${clvmd:+$clvmd,}openais" + [ -z "${clvmd}" ] && clvmd="none" + myconf+=( --with-clvmd=${clvmd} ) + myconf+=( --with-pool=${buildmode} ) + myconf+=( --enable-lvmlockd-dlm ) + else + myconf+=( --with-clvmd=none --with-cluster=none ) + fi + + econf \ + $(use_enable readline) \ + $(use_enable selinux) \ + --enable-pkgconfig \ + --with-confdir="${EPREFIX}"/etc \ + --exec-prefix="${EPREFIX}" \ + --sbindir="${EPREFIX}/sbin" \ + --with-staticdir="${EPREFIX}"/sbin \ + --libdir="${EPREFIX}/$(get_libdir)" \ + --with-usrlibdir="${EPREFIX}/usr/$(get_libdir)" \ + --with-default-dm-run-dir=/run \ + --with-default-run-dir=/run/lvm \ + --with-default-locking-dir=/run/lock/lvm \ + --with-default-pid-dir=/run \ + $(use_enable udev udev_rules) \ + $(use_enable udev udev_sync) \ + $(use_with udev udevdir "$(get_udevdir)"/rules.d) \ + $(use_enable sanlock lvmlockd-sanlock) \ + $(use_enable systemd udev-systemd-background-jobs) \ + --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" \ + ${myconf[@]} \ + CLDFLAGS="${LDFLAGS}" +} + +src_compile() { + pushd include >/dev/null + emake + popd >/dev/null + + if use device-mapper-only ; then + emake device-mapper + else + emake + emake CC="$(tc-getCC)" -C scripts lvm2_activation_generator_systemd_red_hat + fi +} + +src_install() { + local inst + INSTALL_TARGETS="install install_tmpfiles_configuration" + # install systemd related files only when requested, bug #522430 + use systemd && INSTALL_TARGETS="${INSTALL_TARGETS} install_systemd_units install_systemd_generators" + use device-mapper-only && INSTALL_TARGETS="install_device-mapper" + for inst in ${INSTALL_TARGETS}; do + emake DESTDIR="${D}" ${inst} + done + + newinitd "${FILESDIR}"/device-mapper.rc-2.02.105-r2 device-mapper + newconfd "${FILESDIR}"/device-mapper.conf-1.02.22-r3 device-mapper + + if use !device-mapper-only ; then + newinitd "${FILESDIR}"/dmeventd.initd-2.02.67-r1 dmeventd + newinitd "${FILESDIR}"/lvm.rc-2.02.172 lvm + newconfd "${FILESDIR}"/lvm.confd-2.02.28-r2 lvm + + newinitd "${FILESDIR}"/lvm-monitoring.initd-2.02.105-r2 lvm-monitoring + newinitd "${FILESDIR}"/lvmetad.initd-2.02.116-r3 lvmetad + fi + + if use sanlock; then + newinitd "${FILESDIR}"/lvmlockd.initd-2.02.166-r1 lvmlockd + fi + + if use clvm; then + newinitd "${FILESDIR}"/clvmd.rc-2.02.39 clvmd + newconfd "${FILESDIR}"/clvmd.confd-2.02.39 clvmd + fi + + if use static-libs; then + dolib.a libdm/ioctl/libdevmapper.a + dolib.a libdaemon/client/libdaemonclient.a #462908 + #gen_usr_ldscript libdevmapper.so + dolib.a daemons/dmeventd/libdevmapper-event.a + #gen_usr_ldscript libdevmapper-event.so + else + rm -f "${ED}"usr/$(get_libdir)/{libdevmapper-event,liblvm2cmd,liblvm2app,libdevmapper}.a + fi + + if use lvm2create_initrd; then + dosbin scripts/lvm2create_initrd/lvm2create_initrd + doman scripts/lvm2create_initrd/lvm2create_initrd.8 + newdoc scripts/lvm2create_initrd/README README.lvm2create_initrd + fi + + insinto /etc + doins "${FILESDIR}"/dmtab + + dodoc README VERSION* WHATS_NEW WHATS_NEW_DM doc/*.{c,txt} conf/*.conf +} + +pkg_postinst() { + ewarn "Make sure the \"lvm\" init script is in the runlevels:" + ewarn "# rc-update add lvm boot" + ewarn + ewarn "Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want" + ewarn "to enable lvm autoactivation and metadata caching." +} + +src_test() { + einfo "Tests are disabled because of device-node mucking, if you want to" + einfo "run tests, compile the package and see ${S}/tests" +} diff --git a/sys-fs/lvm2/metadata.xml b/sys-fs/lvm2/metadata.xml new file mode 100644 index 0000000..cca547c --- /dev/null +++ b/sys-fs/lvm2/metadata.xml @@ -0,0 +1,32 @@ + + + + + robbat2@gentoo.org + Robin H. Johnson + + + agk@redhat.com + Alasdair Kergon + Upstream Maintainer (please CC on bugs) + + + cardoe@gentoo.org + Doug Goldstein + Backup to Robin. Please CC on bugs. + + + Allow users to build clustered lvm2 + Cman support for clustered lvm + Corosync support for clustered lvm + Allow users to build lvm2 with lvm1 support + Install lvm2create_initrd script and pull in sys-apps/makedev for the /sbin/MAKEDEV command + Openais support for clustered lvm + Support for thin volumes + Build only device-mapper and not the rest of LVM2 (UNSUPPORTED) + Enable lvmlockd with support for sanlock + + + cpe:/a:heinz_mauelshagen:lvm2 + + -- 2.45.2